Équipement marin 300 microns 2507 duplex en acier inoxydable tissé maille / fil de filtre
Informations de base
Modèle: LM-685
Description du produit
Material |
UNS S32750 F53/SAF2507 stainless steel wire |
Mesh count |
2-200
|
wire Diameter |
0.07-2mm
|
Roll Size |
Common 1m*30m can be customized |
Filtration |
50%-80% |
Woven Technique:
|
Plain Weave |
Introduction |
s32750 (F53/SAF2507) alloy is super duplex stainless steel made up of 250%Cr, 40% Mo and 7% Ni and N. This steel is mainly used in chemical, petrochemical and marine equipment which required special intension and corrosion resistance. |
Features |
1 resist chloride corrosion 2 higher heat conductivity and lower thermal expansion corrosion. 3 resist pitting corrosion, crevice corrosion and general corrosion. 4 compared with 2205, S32750 is with corrosion resistance ability suited to extreme corrosion environment. 5 its impact strength is high, but S32750 alloy is not suitable for environment with temperature higher than 299℃, then its toughness will be reduced |
Application |
1 oil and gad industry equipment 2 offshore platform, all kinds of heat exchangers 3 water treatment equipment, water circulation system 4 chemical industry, pulp container, high corrosion resistance parts 6 power plant equipment and absorption tower device etc |
Cr | Ni | Mo | C | N | Mn | Si | Cu | P | S | Fe |
24-26 % | 6-8 % | 3-5 % | 0.030 % | 0.24 – 0.32 % | 1.20 % | 0.80 % | 0.50 % | 0.035 % | 0.020 % | Bal |
Temp | 20oC | 100oC | 200oC | 300oC |
Property | ||||
Density | 7.8 | |||
Modulus of elasticity | 200 | 194 | 186 | 180 |
Poissons ratio | 0.3 | |||
Linear thermal expansion | – | 13 | 13.5 | 14 |
Thermal conductivity | 15 | 16 | 17 | 18 |
Thermal capacity | 500 | 530 | 560 | 5.90 |
Electric resistivity | 0.80 | 0.85 | 0.90 | 1 |
0.2% Offset Yield Strength | 80 ksi |
Ultimate Tensile Strength | 116 ksi |
0.1% Offset Yield Strength 0.2% | 91 ksi |
Elongation in 2 inches, % | 15 % |
Hardness Rockwell C | 32 |
Impact Energy | 74 ft.-lbs |
Density | 0.28 lb per inch3 |
Modulus of elasticity | 28 x 10(6) psi |
Coefficient of thermal expansion | 7.2 x 10(-6) per of at 68 to 212 of |
Thermal conductivity | 8.7 Btu/hr ftoF |
Heat capacity | 0.12 Btu/ lb oF |
Electrical resistivity | 31.5 x10(-6) ohm-inch |
OEM |
Yes |
Special Sizes or Shape |
Yes |
Customized packing |
Yes |
Sample |
Can be offered or Made |
Delivery time |
Usually within 7-15 working days |
Payment terms |
T/T, Western Union, PayPal., Escrow, L/C |
Optional Way of Transportation |
Sea Transportation, Air Transportation International Express: DHL,TNT,DEDEX,UPS,EMS |
Groupes de Produits : Grillage de fil d'acier inoxydable de matériel spécial > Grillage en acier inoxydable duplex
Premium Related Products